Public Recipe
Charcoal and Beer x2
Solid Soap · NaOH · 100 g oil load · 5% superfat · 3 views · 0 saves
Disperse Z-Cote equal parts with sunflower oil. 1.5 tbsp Activated charcoal: 2 tsp charcoal : 4 tsp sunflower oil ** These are a little more concentrated than usual Remove ½ of the batter and add charcoal to it Pour all of the black in the mold. When pouring the white, break through into the black the first few passes, then let it sit on top. OR. Pour one colour along one long edge, the other on the other edge. Alternate the colour on each side every once in a while. Swirl ideas: Use a dowel going back and forth crosswise. Use the dowel, go in on an angle and swirl a figure 8 from bottom to top. OR Use silicone tie Roots Essential Oil Blend 18 gr. lemon or lemongrass, 10 gr Litsea Cubeba, 9 gr Bergamot, 9 gr Peppermint.
Soap profile
Bubbly, cleansing, condition, hardness, longevity, and cream relative to the selected soap type.
Target 18-30
Target 10-20
Target 44-69
Target 29-54
Target 25-50
Target 16-30
Fatty acid balance
Weighted from the oil phase using the current recipe percentages.
Printable formula
Charcoal and Beer x2
Solid Soap · NaOH
- Oil load
- 100 g
- Superfat
- 5%
- Lye
- 13.9 g
- Liquid
- 33.5 g
Ingredients
| Ingredient | Type | Percent | Weight |
|---|---|---|---|
| Olive Oil | oil | 58.2% | 58.2 g |
| Coconut Oil 76 | oil | 24.4% | 24.4 g |
| Castor Oil | oil | 4% | 4.0 g |
| Shea Butter | oil | 4.5% | 4.5 g |
| Cocoa Butter | oil | 8.9% | 8.9 g |
| Yellow Beeswax | additive | 26% | 26.0 g |
| Sodium Lactate | additive | 0% | 0.0 g |
| Citric Acid | additive | 20% | 20.0 g |
| Activated Charcoal | additive | 0% | 0.0 g |
| Clay | additive | 0% | 0.0 g |
Non-oil entries are shown as percentage of oil load for maker planning.
Soap quality
- Bubbly lather
- 17
- Cleansing
- 16
- Condition
- 60
- Hardness
- 36
- Longevity
- 20
- Creamy lather
- 23
Fatty acids
- Lauric
- 12
- Myristic
- 5
- Palmitic
- 12
- Stearic
- 7
- Ricinoleic
- 3
- Oleic
- 49
- Linoleic
- 7
- Linolenic
- 1
Batch preparation checklist
- Verify formula, lye type, scale accuracy, and all ingredient labels.
- Wear eye protection, gloves, long sleeves, and prepare a ventilated lye-safe area.
- Weigh oils, additives, scent, lye, and liquid in separate clearly labeled containers.
- Confirm mold capacity, batch lot code, cure rack space, and cleanup plan.
- Record actual temperatures, substitutions, trace notes, pour time, and unmold date.
Review notes
- Base oil total: 100.0%
- Primary oils: Olive Oil, Coconut Oil 76, Castor Oil, Shea Butter
- Estimated raw material cost: $0.00
- Shea Butter is below the recommended minimum usage range.
- Yellow Beeswax is above the recommended maximum usage range.
- Sodium Lactate is below the recommended minimum usage range.
- Citric Acid is above the recommended maximum usage range.
- Activated Charcoal is below the recommended minimum usage range.
- Additive load is high. Review formula stability.
Printout generated from a public SoapPilot recipe. Recalculate and verify every formula before production; this page is not professional safety, medical, cosmetic, or legal advice.
Label preview
Public recipe page with INCI-backed label visualization.
Label editor
Build a standard front label and an INCI-based back label from the recipe.
SoapPilot
Charcoal and Beer x2
Soap
Net wt. 100 g
Back label
Ingredients (INCI)
Olea Europaea Fruit Oil, Cera Alba, Cocos Nucifera Oil, Citric Acid, Theobroma Cacao Seed Butter, Butyrospermum Parkii Butter, Ricinus Communis Seed Oil, Sodium Lactate, Charcoal Powder, Clay