Public Recipe
Ebonit Soap (15
Solid Soap · NaOH · 100 g oil load · 5% superfat · 3 views · 0 saves
When the oil-greas-wax mixture is about 60-65 ° C, work begins. It is not advisable to cool it down further, as it precipitats beeswax. With continuous blending, add the 40 ° C lye solution slowly to make it cool, otherwise it can cook. In the meantime, you should not stop the winding, as the process immediately freezes. Pudding very quickly. In the meantime, some non-accelerating essential oil may be added. In the end, you may still end up risking mixing in a small amount of honey or sugar solution, though this may cause it to heat up and separate immediately, and can only be cured by the HP process. If you have succeeded so far, there is a quick shovel into the mold with a quick finish. There is no time for soap modeling and coloring. Plug in a meat spike thermometer quickly and march out onto the cold floor. It will gel, almost flow. Pray, listen, and act quickly when needed. Take it back to the room or take it back to the cold stone as the process requires. Hopefully it won't crack. When the temperature drops below 55 ° C and does not rise back, you have probably won. It will have a deliciously rich creamy foam. :) Good luck!
Soap profile
Bubbly, cleansing, condition, hardness, longevity, and cream relative to the selected soap type.
Profile incomplete — 15% of oils lack fatty-acid data (Yellow Beeswax). Values reflect the known oils only.
Target 18-30
Target 10-20
Target 44-69
Target 29-54
Target 25-50
Target 16-30
Fatty acid balance
Weighted from the oil phase using the current recipe percentages.
Printable formula
Ebonit Soap (15
Solid Soap · NaOH
- Oil load
- 100 g
- Superfat
- 5%
- Lye
- 13.1 g
- Liquid
- 50.0 g
Ingredients
| Ingredient | Type | Percent | Weight |
|---|---|---|---|
| Olive Oil | oil | 40% | 40.0 g |
| Coconut Oil 76 | oil | 25% | 25.0 g |
| Palm Oil | oil | 10% | 10.0 g |
| Castor Oil | oil | 5% | 5.0 g |
| Cocoa Butter | oil | 5% | 5.0 g |
| Yellow Beeswax | oil | 15% | 15.0 g |
| Honey | additive | 0% | 0.0 g |
Non-oil entries are shown as percentage of oil load for maker planning.
Soap quality
- Bubbly lather
- 20
- Cleansing
- 20
- Condition
- 55
- Hardness
- 40
- Longevity
- 21
- Creamy lather
- 26
Fatty acids
- Lauric
- 14
- Myristic
- 6
- Palmitic
- 16
- Stearic
- 5
- Ricinoleic
- 5
- Oleic
- 43
- Linoleic
- 7
- Linolenic
- 0
Batch preparation checklist
- Verify formula, lye type, scale accuracy, and all ingredient labels.
- Wear eye protection, gloves, long sleeves, and prepare a ventilated lye-safe area.
- Weigh oils, additives, scent, lye, and liquid in separate clearly labeled containers.
- Confirm mold capacity, batch lot code, cure rack space, and cleanup plan.
- Record actual temperatures, substitutions, trace notes, pour time, and unmold date.
Review notes
- Base oil total: 100.0%
- Primary oils: Olive Oil, Coconut Oil 76, Palm Oil, Castor Oil
- Estimated raw material cost: $0.00
- Palm Oil is below the recommended minimum usage range.
- Yellow Beeswax is above the recommended maximum usage range.
- Honey is below the recommended minimum usage range.
Printout generated from a public SoapPilot recipe. Recalculate and verify every formula before production; this page is not professional safety, medical, cosmetic, or legal advice.
Label preview
Public recipe page with INCI-backed label visualization.
Label editor
Build a standard front label and an INCI-based back label from the recipe.
SoapPilot
Ebonit Soap (15
Soap
Net wt. 100 g
Back label
Ingredients (INCI)
Olea Europaea Fruit Oil, Cocos Nucifera Oil, Cera Alba, Elaeis Guineensis Oil, Ricinus Communis Seed Oil, Theobroma Cacao Seed Butter, Honey