Public Recipe
Red Palm Oil
Solid Soap · NaOH · 100 g oil load · 5% superfat · 16 views · 0 saves
¼ tsp tumeric sugar ⚗️ How to Add It: Option 1: Dissolve in water (best method) Measure your distilled water for the lye solution. Warm a small portion (about ¼ cup of that water). Stir in the sugar until completely dissolved. Let cool slightly, then add your lye slowly into this sweetened water (always lye into liquid!). It will heat up faster than usual, so let it cool to your target temperature before mixing with oils. Option 2: Add at light trace Dissolve sugar in 1–2 tbsp warm water, then stir it into your batter at light trace. This is easier but less uniform — a few sugar crystals might remain.
Soap profile
Bubbly, cleansing, condition, hardness, longevity, and cream relative to the selected soap type.
Profile incomplete — 2% of oils lack fatty-acid data (Yellow Beeswax). Values reflect the known oils only.
Target 18-30
Target 10-20
Target 44-69
Target 29-54
Target 25-50
Target 16-30
Fatty acid balance
Weighted from the oil phase using the current recipe percentages.
Printable formula
Red Palm Oil
Solid Soap · NaOH
- Oil load
- 100 g
- Superfat
- 5%
- Lye
- 15.2 g
- Liquid
- 36.5 g
Ingredients
| Ingredient | Type | Percent | Weight |
|---|---|---|---|
| Olive Oil | oil | 29% | 29.0 g |
| Coconut Oil 76 | oil | 24% | 24.0 g |
| Castor Oil | oil | 10% | 10.0 g |
| Shea Butter | oil | 10% | 10.0 g |
| Yellow Beeswax | oil | 2% | 2.0 g |
| Kaolin Clay | additive | 0% | 0.0 g |
| Red Palm Butter | oil | 25% | 25.0 g |
Non-oil entries are shown as percentage of oil load for maker planning.
Soap quality
- Bubbly lather
- 17
- Cleansing
- 17
- Condition
- 54
- Hardness
- 42
- Longevity
- 25
- Creamy lather
- 34
Fatty acids
- Lauric
- 12
- Myristic
- 5
- Palmitic
- 18
- Stearic
- 7
- Ricinoleic
- 9
- Oleic
- 38
- Linoleic
- 7
- Linolenic
- 0
Batch preparation checklist
- Verify formula, lye type, scale accuracy, and all ingredient labels.
- Wear eye protection, gloves, long sleeves, and prepare a ventilated lye-safe area.
- Weigh oils, additives, scent, lye, and liquid in separate clearly labeled containers.
- Confirm mold capacity, batch lot code, cure rack space, and cleanup plan.
- Record actual temperatures, substitutions, trace notes, pour time, and unmold date.
Review notes
- Base oil total: 100.0%
- Primary oils: Olive Oil, Coconut Oil 76, Castor Oil, Shea Butter
- Estimated raw material cost: $0.00
- Kaolin Clay is below the recommended minimum usage range.
Printout generated from a public SoapPilot recipe. Recalculate and verify every formula before production; this page is not professional safety, medical, cosmetic, or legal advice.
Label preview
Public recipe page with INCI-backed label visualization.
Label editor
Build a standard front label and an INCI-based back label from the recipe.
SoapPilot
Red Palm Oil
Soap
Net wt. 100 g
Back label
Ingredients (INCI)
Olea Europaea Fruit Oil, Red Palm Butter, Cocos Nucifera Oil, Ricinus Communis Seed Oil, Butyrospermum Parkii Butter, Cera Alba, Kaolin