Public Recipe
Shaving Bar Soap - Dual Lye Modified Cold Process w/Palm Oil 3"x23" Loaf Copy
mixed · 100 g oil load · 6% superfat · 3 views · 0 saves
Mix Titanium Dioxide with heated oils, blend well. Mix Kaolin Clay with lye water. Oil temp and lye water temps should be about 165 or so. Add lye water carefully to avoid volcanoes. Blending should be done off of the heat. Trace will go through applesauce, then like mashed potatoes, then a thin cake batter consistency. Add glycerin, sodium lactate, and fragrance oil after trace becomes like thin cake batter. Stir slowly to avoid splashing as mixture is still very hot.
Soap profile
Bubbly, cleansing, condition, hardness, longevity, and cream relative to the selected soap type.
Target 18-30
Target 10-20
Target 44-69
Target 29-54
Target 25-50
Target 16-30
Fatty acid balance
Weighted from the oil phase using the current recipe percentages.
Printable formula
Shaving Bar Soap - Dual Lye Modified Cold Process w/Palm Oil 3"x23" Loaf Copy
mixed
- Oil load
- 100 g
- Superfat
- 6%
- Lye
- 13.7 g
- Liquid
- 33.0 g
Ingredients
| Ingredient | Type | Percent | Weight |
|---|---|---|---|
| Coconut Oil 76 | oil | 15% | 15.0 g |
| Palm Oil | oil | 10% | 10.0 g |
| Castor Oil | oil | 5% | 5.0 g |
| Shea Butter | oil | 5% | 5.0 g |
| Cocoa Butter | oil | 5% | 5.0 g |
| Stearic Acid | oil | 60% | 60.0 g |
| Sodium Lactate | additive | 0% | 0.0 g |
| Glycerin | additive | 0% | 0.0 g |
| Kaolin Clay | additive | 0% | 0.0 g |
| Titanium Dioxide | additive | 0% | 0.0 g |
Non-oil entries are shown as percentage of oil load for maker planning.
Soap quality
- Bubbly lather
- 10
- Cleansing
- 10
- Condition
- 17
- Hardness
- 79
- Longevity
- 69
- Creamy lather
- 73
Fatty acids
- Lauric
- 7
- Myristic
- 3
- Palmitic
- 7
- Stearic
- 61
- Ricinoleic
- 4
- Oleic
- 10
- Linoleic
- 2
- Linolenic
- 0
Batch preparation checklist
- Verify formula, lye type, scale accuracy, and all ingredient labels.
- Wear eye protection, gloves, long sleeves, and prepare a ventilated lye-safe area.
- Weigh oils, additives, scent, lye, and liquid in separate clearly labeled containers.
- Confirm mold capacity, batch lot code, cure rack space, and cleanup plan.
- Record actual temperatures, substitutions, trace notes, pour time, and unmold date.
Review notes
- Base oil total: 100.0%
- Primary oils: Coconut Oil 76, Palm Oil, Castor Oil, Shea Butter
- Estimated raw material cost: $0.00
- Palm Oil is below the recommended minimum usage range.
- Sodium Lactate is below the recommended minimum usage range.
- Glycerin is below the recommended minimum usage range.
- Kaolin Clay is below the recommended minimum usage range.
- Titanium Dioxide is below the recommended minimum usage range.
Printout generated from a public SoapPilot recipe. Recalculate and verify every formula before production; this page is not professional safety, medical, cosmetic, or legal advice.
Label preview
Public recipe page with INCI-backed label visualization.
Label editor
Build a standard front label and an INCI-based back label from the recipe.
SoapPilot
Shaving Bar Soap - Dual Lye Modified Cold Process w/Palm Oil 3"x23" Loaf Copy
Soap
Net wt. 100 g
Back label
Ingredients (INCI)
Stearic Acid, Cocos Nucifera Oil, Elaeis Guineensis Oil, Ricinus Communis Seed Oil, Butyrospermum Parkii Butter, Theobroma Cacao Seed Butter, Sodium Lactate, Glycerin, Kaolin, Titanium Dioxide