Public Recipe
White Star -Nov 2021
mixed · 100 g oil load · 4% superfat · 4 views · 0 saves
Directions: Note: This recipe doesn't have tussah silk, goat milk or lanolin. Shea Butter is used twice - once as an ingredient and once as the super fat. Do lye water first. Take some water and emulsify 0.18 oz aloe into it and add back to the rest of the water. Add Lye, remembering eye and other protection. stir gently. Put oils on to heat. Once lye water is below 140 degrees (use ice bath if needed) , , and the glycerin Add lye water mix once oils are 160-170 degrees. Add Bentonite Clay and Kaolin. (7 TBSP of each) Add. 0.036 oz EDTA dissolved in a small amount of distilled water. Add 4.8 oz shea Butter at trace (4.8 oz) Add 8.6 oz Sodium lactate Add Fragrance oil, 10.6 oz of the appropriate fragrance Put into Loaves
Soap profile
Bubbly, cleansing, condition, hardness, longevity, and cream relative to the selected soap type.
Target 18-30
Target 10-20
Target 44-69
Target 29-54
Target 25-50
Target 16-30
Fatty acid balance
Weighted from the oil phase using the current recipe percentages.
Printable formula
White Star -Nov 2021
mixed
- Oil load
- 100 g
- Superfat
- 4%
- Lye
- 14.6 g
- Liquid
- 29.2 g
Ingredients
| Ingredient | Type | Percent | Weight |
|---|---|---|---|
| Coconut Oil 76 | oil | 25% | 25.0 g |
| Castor Oil | oil | 5% | 5.0 g |
| Shea Butter | oil | 30% | 30.0 g |
| Shea Butter | additive | 0% | 0.0 g |
| Stearic Acid | oil | 35% | 35.0 g |
| Sodium Lactate | additive | 0% | 0.0 g |
| Glycerin | additive | 0% | 0.0 g |
| Bentonite Clay | additive | 0% | 0.0 g |
| Myristic Acid | oil | 5% | 5.0 g |
| Aloe Powder | additive | 0% | 0.0 g |
Non-oil entries are shown as percentage of oil load for maker planning.
Soap quality
- Bubbly lather
- 22
- Cleansing
- 22
- Condition
- 24
- Hardness
- 71
- Longevity
- 50
- Creamy lather
- 54
Fatty acids
- Lauric
- 12
- Myristic
- 10
- Palmitic
- 4
- Stearic
- 46
- Ricinoleic
- 4
- Oleic
- 17
- Linoleic
- 3
- Linolenic
- 0
Batch preparation checklist
- Verify formula, lye type, scale accuracy, and all ingredient labels.
- Wear eye protection, gloves, long sleeves, and prepare a ventilated lye-safe area.
- Weigh oils, additives, scent, lye, and liquid in separate clearly labeled containers.
- Confirm mold capacity, batch lot code, cure rack space, and cleanup plan.
- Record actual temperatures, substitutions, trace notes, pour time, and unmold date.
Review notes
- Base oil total: 100.0%
- Primary oils: Coconut Oil 76, Castor Oil, Shea Butter, Stearic Acid
- Estimated raw material cost: $0.00
- Shea Butter is above the recommended maximum usage range.
- Shea Butter is below the recommended minimum usage range.
- Sodium Lactate is below the recommended minimum usage range.
- Glycerin is below the recommended minimum usage range.
- Bentonite Clay is below the recommended minimum usage range.
Printout generated from a public SoapPilot recipe. Recalculate and verify every formula before production; this page is not professional safety, medical, cosmetic, or legal advice.
Label preview
Public recipe page with INCI-backed label visualization.
Label editor
Build a standard front label and an INCI-based back label from the recipe.
SoapPilot
White Star -Nov 2021
Soap
Net wt. 100 g
Back label
Ingredients (INCI)
Stearic Acid, Butyrospermum Parkii Butter, Cocos Nucifera Oil, Ricinus Communis Seed Oil, Myristic Acid, Butyrospermum Parkii Butter, Sodium Lactate, Glycerin, Bentonite, Aloe Powder