Public Recipe
6/26/25 pump lotion-niacinamide hyaluronic
non_soap · 100 g oil load · 5% superfat · 7 views · 0 saves
Basic Lotion Recipe: The finished pH of this recipe with all the extras was 6.5, if you want to lower it to 5, add a few drops of 50/50 citric acid/water solution to base. 454g Distilled Water (+ 34g if you're not making the niacinamide solution)--CHECK THIS EACH TIME 34g Glycerin 108g Liquid Oil 28g Emulsifying Wax 3.4g Vit E oil 3.4g Preservative Extras 13.6g Niacinamide Powder 34g Distilled Water (mixed w/ niacinamide) 7g Hyaluronic Acid Powder 3.4g Caffeine Extract or 72% Distilled Water 5% Glycerin 16% Liquid Oils 4% Emulsifying Wax . 5% Vit E Oil .5% Preservative 2% Niacinamide Powder ( 1% Hyaluronic Acid & .5% Caffeine Extract, based on total volume MADE 6/26/25 ‘oatmeal milk and honey’ fragrance BB (2.5 %) 3 gr. used hyaluronic serum 3 g. next time: make sure the water is hot before mixing with oils. I was afraid it would not set up b/c the water was only about 125 degrees. put in pumps--almost 3 @ 8 oz. each Feels really good! Basic to Bougie PUMP LOTION Recipe - Hyaluronic Acid, Niacinamide & Caffeine Extract! #lotion
Soap profile
Bubbly, cleansing, condition, hardness, longevity, and cream relative to the selected soap type.
Profile incomplete — 0% of oils lack fatty-acid data (Vitamin E). Values reflect the known oils only.
Target 18-30
Target 10-20
Target 44-69
Target 29-54
Target 25-50
Target 16-30
Fatty acid balance
Weighted from the oil phase using the current recipe percentages.
Printable formula
6/26/25 pump lotion-niacinamide hyaluronic
non_soap
- Oil load
- 100 g
- Superfat
- 5%
- Lye
- 16.1 g
- Liquid
- 38.5 g
Ingredients
| Ingredient | Type | Percent | Weight |
|---|---|---|---|
| Glycerin | additive | 34% | 34.0 g |
| Distilled Water | additive | 454% | 454.0 g |
| Meadowfoam Oil | oil | 100% | 100.0 g |
| Vitamin E | oil | 0% | 0.0 g |
| Vitamin E Oil | additive | 3% | 3.0 g |
| liquid germall plus | additive | 0% | 0.0 g |
| Hyaluronic Acid Serum Base | additive | 3% | 3.0 g |
| Niacinamide - Vitamin B3 | additive | 13.6% | 13.6 g |
Non-oil entries are shown as percentage of oil load for maker planning.
Soap quality
- Bubbly lather
- 0
- Cleansing
- 0
- Condition
- 0
- Hardness
- 0
- Longevity
- 0
- Creamy lather
- 0
Fatty acids
- Lauric
- 0
- Myristic
- 0
- Palmitic
- 0
- Stearic
- 0
- Ricinoleic
- 0
- Oleic
- 0
- Linoleic
- 0
- Linolenic
- 0
Batch preparation checklist
- Verify formula, lye type, scale accuracy, and all ingredient labels.
- Wear eye protection, gloves, long sleeves, and prepare a ventilated lye-safe area.
- Weigh oils, additives, scent, lye, and liquid in separate clearly labeled containers.
- Confirm mold capacity, batch lot code, cure rack space, and cleanup plan.
- Record actual temperatures, substitutions, trace notes, pour time, and unmold date.
Review notes
- Base oil total: 100.0%
- Primary oils: Meadowfoam Oil, Vitamin E
- Estimated raw material cost: $0.00
- Glycerin is above the recommended maximum usage range.
- Additive load is high. Review formula stability.
Printout generated from a public SoapPilot recipe. Recalculate and verify every formula before production; this page is not professional safety, medical, cosmetic, or legal advice.
Label preview
Public recipe page with INCI-backed label visualization.
Label editor
Build a standard front label and an INCI-based back label from the recipe.
SoapPilot
6/26/25 pump lotion-niacinamide hyaluronic
Soap
Net wt. 100 g
Back label
Ingredients (INCI)
Water, Meadowfoam Oil, Glycerin, Niacinamide - Vitamin B3, Vitamin E Oil, Hyaluronic Acid Serum Base, Vitamin E, liquid germall plus