Public Recipe
B11 Borage
mixed · 100 g oil load · 8% superfat · 4 views · 0 saves
All liquid is Aloe juice. Soaped 24 July 21 @30C, med trace. Used a bit too much NaEDTA. Charcoal (black), purple/blue/yellow micas, uncolored. DOS on all bars from the cutting wire of lies. Has a nice feel though.
Soap profile
Bubbly, cleansing, condition, hardness, longevity, and cream relative to the selected soap type.
Target 18-30
Target 10-20
Target 44-69
Target 29-54
Target 25-50
Target 16-30
Fatty acid balance
Weighted from the oil phase using the current recipe percentages.
Printable formula
B11 Borage
mixed
- Oil load
- 100 g
- Superfat
- 8%
- Lye
- 15.3 g
- Liquid
- 30.5 g
Ingredients
| Ingredient | Type | Percent | Weight |
|---|---|---|---|
| Coconut Oil 76 | oil | 23% | 23.0 g |
| Castor Oil | oil | 6.7% | 6.7 g |
| Shea Butter | oil | 15.9% | 15.9 g |
| Cocoa Butter | oil | 15.9% | 15.9 g |
| Salt | additive | 0% | 0.0 g |
| Borage Oil | oil | 16.5% | 16.5 g |
| Walnut Oil | oil | 22% | 22.0 g |
| Clay | additive | 0% | 0.0 g |
| Tetrasodium EDTA | additive | 18% | 18.0 g |
Non-oil entries are shown as percentage of oil load for maker planning.
Soap quality
- Bubbly lather
- 16
- Cleansing
- 15
- Condition
- 51
- Hardness
- 39
- Longevity
- 24
- Creamy lather
- 30
Fatty acids
- Lauric
- 11
- Myristic
- 4
- Palmitic
- 10
- Stearic
- 14
- Ricinoleic
- 6
- Oleic
- 22
- Linoleic
- 22
- Linolenic
- 1
Batch preparation checklist
- Verify formula, lye type, scale accuracy, and all ingredient labels.
- Wear eye protection, gloves, long sleeves, and prepare a ventilated lye-safe area.
- Weigh oils, additives, scent, lye, and liquid in separate clearly labeled containers.
- Confirm mold capacity, batch lot code, cure rack space, and cleanup plan.
- Record actual temperatures, substitutions, trace notes, pour time, and unmold date.
Review notes
- Base oil total: 100.0%
- Primary oils: Coconut Oil 76, Castor Oil, Shea Butter, Cocoa Butter
- Estimated raw material cost: $0.00
- Cocoa Butter is above the recommended maximum usage range.
- Salt is below the recommended minimum usage range.
- Additive load is high. Review formula stability.
Printout generated from a public SoapPilot recipe. Recalculate and verify every formula before production; this page is not professional safety, medical, cosmetic, or legal advice.
Label preview
Public recipe page with INCI-backed label visualization.
Label editor
Build a standard front label and an INCI-based back label from the recipe.
SoapPilot
B11 Borage
Soap
Net wt. 100 g
Back label
Ingredients (INCI)
Cocos Nucifera Oil, Walnut Oil, Tetrasodium EDTA, Borage Oil, Butyrospermum Parkii Butter, Theobroma Cacao Seed Butter, Ricinus Communis Seed Oil, Sodium Chloride, Clay