Public Recipe
Bar Bar 082821A
Solid Soap · NaOH · 100 g oil load · 5% superfat · 4 views · 0 saves
1. Put 84.04 oz distilled water in metal container. Add Aloe-mix w/ immersion blender. Add silk. 2. Add Lye to water, all Sodium Hydroxide. 3. Put oils on to heat. Use a temp of 300 degrees. Decrease as needed to keep temp from going over 170. 4. Add 1 can goat milk to Lye water and stir. Then, add lye mixture to oils when oil is between 160 and 170 degrees 5. Add EDTA dissolved in water as ph comes down. Add Lanolin at trace, followed by Sodium Lactate. 5. Add Fragrance. 5.5% of batch weight.
Soap profile
Bubbly, cleansing, condition, hardness, longevity, and cream relative to the selected soap type.
Target 18-30
Target 10-20
Target 44-69
Target 29-54
Target 25-50
Target 16-30
Fatty acid balance
Weighted from the oil phase using the current recipe percentages.
Printable formula
Bar Bar 082821A
Solid Soap · NaOH
- Oil load
- 100 g
- Superfat
- 5%
- Lye
- 14.6 g
- Liquid
- 29.3 g
Ingredients
| Ingredient | Type | Percent | Weight |
|---|---|---|---|
| Olive Oil | oil | 40% | 40.0 g |
| Coconut Oil 76 | oil | 14% | 14.0 g |
| Castor Oil | oil | 5% | 5.0 g |
| Sunflower Oil | oil | 16% | 16.0 g |
| Shea Butter | oil | 13% | 13.0 g |
| Lanolin | additive | 0% | 0.0 g |
| Sodium Lactate | additive | 0% | 0.0 g |
| Myristic Acid | oil | 12% | 12.0 g |
| Aloe Powder | additive | 0% | 0.0 g |
| Tussah Silk | additive | 0% | 0.0 g |
| EDTA | additive | 0% | 0.0 g |
Non-oil entries are shown as percentage of oil load for maker planning.
Soap quality
- Bubbly lather
- 22
- Cleansing
- 21
- Condition
- 60
- Hardness
- 37
- Longevity
- 16
- Creamy lather
- 20
Fatty acids
- Lauric
- 7
- Myristic
- 15
- Palmitic
- 8
- Stearic
- 8
- Ricinoleic
- 4
- Oleic
- 41
- Linoleic
- 14
- Linolenic
- 1
Batch preparation checklist
- Verify formula, lye type, scale accuracy, and all ingredient labels.
- Wear eye protection, gloves, long sleeves, and prepare a ventilated lye-safe area.
- Weigh oils, additives, scent, lye, and liquid in separate clearly labeled containers.
- Confirm mold capacity, batch lot code, cure rack space, and cleanup plan.
- Record actual temperatures, substitutions, trace notes, pour time, and unmold date.
Review notes
- Base oil total: 100.0%
- Primary oils: Olive Oil, Coconut Oil 76, Castor Oil, Sunflower Oil
- Estimated raw material cost: $0.00
- Lanolin is below the recommended minimum usage range.
- Sodium Lactate is below the recommended minimum usage range.
Printout generated from a public SoapPilot recipe. Recalculate and verify every formula before production; this page is not professional safety, medical, cosmetic, or legal advice.
Label preview
Public recipe page with INCI-backed label visualization.
Label editor
Build a standard front label and an INCI-based back label from the recipe.
SoapPilot
Bar Bar 082821A
Soap
Net wt. 100 g
Back label
Ingredients (INCI)
Olea Europaea Fruit Oil, Helianthus Annuus Seed Oil, Cocos Nucifera Oil, Butyrospermum Parkii Butter, Myristic Acid, Ricinus Communis Seed Oil, Lanolin, Sodium Lactate, Aloe Powder, Tussah Silk, EDTA