Public Recipe
Black Salt Witch Pebble - makes 10 exfoliating soaps
Solid Soap · NaOH · 20 g oil load · 15% superfat · 3 views · 0 saves
Measure out 6 oz (weight) of salt and separate into 1 ounces and 5 ounces Measure out coconut oil and shea butter and put on a low heat to melt Measure out distilled water half and half, four ounces each Warm the four ounces of distilled water for 15 seconds in the microwave then dissolve 1 oz salt in it Once salt is dissolved put sugar into the brine and stir till also dissolved Measure out the citric acid and dissolve it in the rest of the distilled water Measure out the lye then pour it into the citric acid water and stir till dissolved. Pour the dissolved sugar water and salt water into the lye solution and set aside to cool Use a stick blender to mix the activated charcoal into the melted oils Measure out 1 ounce nag champa fragrance oil and have it ready next to the salt When lye and oils are at about 90 degrees pour lye water into oils and pulse blend to emulsion Add fragrance oil and blend to a light trace - Nag Champa does not accelerate Stir in 5 oz salt with a spatula Pour into witch pebble molds, stirring each time to blend salt back in Place in a 175F oven for 30 minutes to CPOP and force off all the water
Soap profile
Bubbly, cleansing, condition, hardness, longevity, and cream relative to the selected soap type.
Target 18-30
Target 10-20
Target 44-69
Target 29-54
Target 25-50
Target 16-30
Fatty acid balance
Weighted from the oil phase using the current recipe percentages.
Printable formula
Black Salt Witch Pebble - makes 10 exfoliating soaps
Solid Soap · NaOH
- Oil load
- 20 g
- Superfat
- 15%
- Lye
- 3.1 g
- Liquid
- 7.4 g
Ingredients
| Ingredient | Type | Percent | Weight |
|---|---|---|---|
| Coconut Oil 76 | oil | 85% | 17.0 g |
| Shea Butter | oil | 5% | 1.0 g |
| Citric Acid | additive | 0% | 0.0 g |
| Activated Charcoal | additive | 0% | 0.0 g |
| Salt | additive | 0% | 0.0 g |
| Rice Bran Oil, refined | oil | 10% | 2.0 g |
| Sugar | additive | 0% | 0.0 g |
Non-oil entries are shown as percentage of oil load for maker planning.
Soap quality
- Bubbly lather
- 57
- Cleansing
- 57
- Condition
- 18
- Hardness
- 72
- Longevity
- 15
- Creamy lather
- 15
Fatty acids
- Lauric
- 41
- Myristic
- 16
- Palmitic
- 10
- Stearic
- 5
- Ricinoleic
- 0
- Oleic
- 13
- Linoleic
- 5
- Linolenic
- 0
Batch preparation checklist
- Verify formula, lye type, scale accuracy, and all ingredient labels.
- Wear eye protection, gloves, long sleeves, and prepare a ventilated lye-safe area.
- Weigh oils, additives, scent, lye, and liquid in separate clearly labeled containers.
- Confirm mold capacity, batch lot code, cure rack space, and cleanup plan.
- Record actual temperatures, substitutions, trace notes, pour time, and unmold date.
Review notes
- Base oil total: 100.0%
- Primary oils: Coconut Oil 76, Shea Butter, Rice Bran Oil, refined
- Estimated raw material cost: $0.00
- Coconut Oil 76 is above the recommended maximum usage range.
- Citric Acid is below the recommended minimum usage range.
- Activated Charcoal is below the recommended minimum usage range.
- Salt is below the recommended minimum usage range.
Printout generated from a public SoapPilot recipe. Recalculate and verify every formula before production; this page is not professional safety, medical, cosmetic, or legal advice.
Label preview
Public recipe page with INCI-backed label visualization.
Label editor
Build a standard front label and an INCI-based back label from the recipe.
SoapPilot
Black Salt Witch Pebble - makes 10 exfoliating soaps
Soap
Net wt. 100 g
Back label
Ingredients (INCI)
Cocos Nucifera Oil, Rice Bran Oil, refined, Butyrospermum Parkii Butter, Citric Acid, Charcoal Powder, Sodium Chloride, Sugar