Public Recipe
Easiest Cook Hot Process Hybrid 3# Oils
mixed · 48 g oil load · 10% superfat · 9 views · 0 saves
10-12% superfat added after saponification - I usually use equal parts Castor oil and Shea butter, but any combination of oils will be fine If you're using cetyl alcohol pellets/flakes, melt them into the superfats Sodium lactate is for better hardening and removal from mold Salt, (harder bar) sugar (lather) and citric acid (chelator) are added to the water you will mix your lye in Kaolin clay is a scent fixatif, added to oils Sorbitol is another lather enhancer, add to sodium lactate
Soap profile
Bubbly, cleansing, condition, hardness, longevity, and cream relative to the selected soap type.
Target 18-30
Target 10-20
Target 44-69
Target 29-54
Target 25-50
Target 16-30
Fatty acid balance
Weighted from the oil phase using the current recipe percentages.
Printable formula
Easiest Cook Hot Process Hybrid 3# Oils
mixed
- Oil load
- 48 g
- Superfat
- 10%
- Lye
- 7.7 g
- Liquid
- 18.4 g
Ingredients
| Ingredient | Type | Percent | Weight |
|---|---|---|---|
| Castor Oil | oil | 15% | 7.2 g |
| Stearic Acid | oil | 5% | 2.4 g |
| Sodium Lactate | additive | 0% | 0.0 g |
| Citric Acid | additive | 0% | 0.0 g |
| Kaolin Clay | additive | 0% | 0.0 g |
| Coconut Oil 92 | oil | 46.667% | 22.4 g |
| Salt | additive | 0% | 0.0 g |
| Cetyl Alcohol | additive | 0% | 0.0 g |
| Lard, Pig Tallow (Manteca) | oil | 33.333% | 16.0 g |
| Sugar | additive | 0% | 0.0 g |
| Sorbitol powder | additive | 0% | 0.0 g |
Non-oil entries are shown as percentage of oil load for maker planning.
Soap quality
- Bubbly lather
- 32
- Cleansing
- 31
- Condition
- 36
- Hardness
- 55
- Longevity
- 24
- Creamy lather
- 37
Fatty acids
- Lauric
- 22
- Myristic
- 9
- Palmitic
- 14
- Stearic
- 11
- Ricinoleic
- 13
- Oleic
- 20
- Linoleic
- 4
- Linolenic
- 0
Batch preparation checklist
- Verify formula, lye type, scale accuracy, and all ingredient labels.
- Wear eye protection, gloves, long sleeves, and prepare a ventilated lye-safe area.
- Weigh oils, additives, scent, lye, and liquid in separate clearly labeled containers.
- Confirm mold capacity, batch lot code, cure rack space, and cleanup plan.
- Record actual temperatures, substitutions, trace notes, pour time, and unmold date.
Review notes
- Base oil total: 100.0%
- Primary oils: Castor Oil, Stearic Acid, Coconut Oil 92, Lard, Pig Tallow (Manteca)
- Estimated raw material cost: $0.00
- Castor Oil is above the recommended maximum usage range.
- Stearic Acid is below the recommended minimum usage range.
- Sodium Lactate is below the recommended minimum usage range.
- Citric Acid is below the recommended minimum usage range.
- Kaolin Clay is below the recommended minimum usage range.
- Coconut Oil 92 is above the recommended maximum usage range.
- Salt is below the recommended minimum usage range.
- Cetyl Alcohol is below the recommended minimum usage range.
Printout generated from a public SoapPilot recipe. Recalculate and verify every formula before production; this page is not professional safety, medical, cosmetic, or legal advice.
Label preview
Public recipe page with INCI-backed label visualization.
Label editor
Build a standard front label and an INCI-based back label from the recipe.
SoapPilot
Easiest Cook Hot Process Hybrid 3# Oils
Soap
Net wt. 100 g
Back label
Ingredients (INCI)
Cocos Nucifera Oil, Lard, Pig Tallow (Manteca), Ricinus Communis Seed Oil, Stearic Acid, Sodium Lactate, Citric Acid, Kaolin, Sodium Chloride, Cetyl Alcohol, Sugar, Sorbitol powder