Public Recipe
Not Manu - B's Bar Soap- 2 - Fisher sub Palm for Tallow and Avocado for Almond
Solid Soap · NaOH · 100 g oil load · 5% superfat · 4 views · 0 saves
Add 1 tb of honey per Lb of oil - pull out a little of the combined oils and add in - mix then add back to the batch before the lye Bee's wax melting point is 145f - Measure the temperatures of the lye-water and the oils. You should aim to cool them both to be about 130°F / 54°C for light-brown colored soap. If you want your bars darker and the honey scent stronger, then mix your soap at 150°F / 66°C. For the darker color it's better to pour the soap into a loaf mold too. If you're a beginner, stick to the temperature and mold for the lighter soap. Pour first the honey then the lye-solution into the pan of oils. I tend to pour the lye through a sieve to catch any potential undissolved lye or bits. Set the mold on a heat-proof surface and leave uncovered for two days. Alternatively, you can pop the mold in the fridge overnight. This will ensure a light color.
Soap profile
Bubbly, cleansing, condition, hardness, longevity, and cream relative to the selected soap type.
Profile incomplete — 2% of oils lack fatty-acid data (Yellow Beeswax). Values reflect the known oils only.
Target 18-30
Target 10-20
Target 44-69
Target 29-54
Target 25-50
Target 16-30
Fatty acid balance
Weighted from the oil phase using the current recipe percentages.
Printable formula
Not Manu - B's Bar Soap- 2 - Fisher sub Palm for Tallow and Avocado for Almond
Solid Soap · NaOH
- Oil load
- 100 g
- Superfat
- 5%
- Lye
- 14.1 g
- Liquid
- 30.0 g
Ingredients
| Ingredient | Type | Percent | Weight |
|---|---|---|---|
| Olive Oil | oil | 27.95% | 27.9 g |
| Palm Oil | oil | 27.95% | 27.9 g |
| Castor Oil | oil | 4.97% | 5.0 g |
| Avocado Oil | oil | 9.11% | 9.1 g |
| Yellow Beeswax | oil | 2.07% | 2.1 g |
| Coconut Oil 92 | oil | 27.95% | 27.9 g |
| Honey | additive | 0% | 0.0 g |
| Clay | additive | 0% | 0.0 g |
Non-oil entries are shown as percentage of oil load for maker planning.
Soap quality
- Bubbly lather
- 19
- Cleansing
- 19
- Condition
- 52
- Hardness
- 42
- Longevity
- 24
- Creamy lather
- 28
Fatty acids
- Lauric
- 13
- Myristic
- 5
- Palmitic
- 20
- Stearic
- 3
- Ricinoleic
- 4
- Oleic
- 40
- Linoleic
- 8
- Linolenic
- 0
Batch preparation checklist
- Verify formula, lye type, scale accuracy, and all ingredient labels.
- Wear eye protection, gloves, long sleeves, and prepare a ventilated lye-safe area.
- Weigh oils, additives, scent, lye, and liquid in separate clearly labeled containers.
- Confirm mold capacity, batch lot code, cure rack space, and cleanup plan.
- Record actual temperatures, substitutions, trace notes, pour time, and unmold date.
Review notes
- Base oil total: 100.0%
- Primary oils: Olive Oil, Palm Oil, Castor Oil, Avocado Oil
- Estimated raw material cost: $0.00
- Honey is below the recommended minimum usage range.
Printout generated from a public SoapPilot recipe. Recalculate and verify every formula before production; this page is not professional safety, medical, cosmetic, or legal advice.
Label preview
Public recipe page with INCI-backed label visualization.
Label editor
Build a standard front label and an INCI-based back label from the recipe.
SoapPilot
Not Manu - B's Bar Soap- 2 - Fisher sub Palm for Tallow and Avocado for Almond
Soap
Net wt. 100 g
Back label
Ingredients (INCI)
Olea Europaea Fruit Oil, Elaeis Guineensis Oil, Cocos Nucifera Oil, Persea Gratissima Oil, Ricinus Communis Seed Oil, Cera Alba, Honey, Clay