Public Recipe
Pine Tar 2025
Solid Soap · NaOH · 100 g oil load · 3% superfat · 6 views · 0 saves
Mix at low temps use a lot of water to slow down trace. wisk (no stick blender) put can of pine tar in large bowl of very hot water (or dbl boiler?) measure and melt hard oils, add liquid oils split fats into two equal portion. Add PT to one half, blend well, set aside. Add lye to other half and bring that to light trace. Hand stir the PT mixture into the soap batter, continue to slowly hand stir until batter looks dull and slightly grainy, then pour quickly into mold
Soap profile
Bubbly, cleansing, condition, hardness, longevity, and cream relative to the selected soap type.
Target 18-30
Target 10-20
Target 44-69
Target 29-54
Target 25-50
Target 16-30
Fatty acid balance
Weighted from the oil phase using the current recipe percentages.
Printable formula
Pine Tar 2025
Solid Soap · NaOH
- Oil load
- 100 g
- Superfat
- 3%
- Lye
- 15.1 g
- Liquid
- 36.4 g
Ingredients
| Ingredient | Type | Percent | Weight |
|---|---|---|---|
| Olive Oil | oil | 23% | 23.0 g |
| Coconut Oil 76 | oil | 27% | 27.0 g |
| Castor Oil | oil | 4% | 4.0 g |
| Activated Charcoal | additive | 0% | 0.0 g |
| Lard, Pig Tallow (Manteca) | oil | 31% | 31.0 g |
| Pine Tar, lye calc only no FA | oil | 15% | 15.0 g |
Non-oil entries are shown as percentage of oil load for maker planning.
Soap quality
- Bubbly lather
- 19
- Cleansing
- 18
- Condition
- 41
- Hardness
- 38
- Longevity
- 20
- Creamy lather
- 23
Fatty acids
- Lauric
- 13
- Myristic
- 5
- Palmitic
- 14
- Stearic
- 6
- Ricinoleic
- 3
- Oleic
- 33
- Linoleic
- 5
- Linolenic
- 0
Batch preparation checklist
- Verify formula, lye type, scale accuracy, and all ingredient labels.
- Wear eye protection, gloves, long sleeves, and prepare a ventilated lye-safe area.
- Weigh oils, additives, scent, lye, and liquid in separate clearly labeled containers.
- Confirm mold capacity, batch lot code, cure rack space, and cleanup plan.
- Record actual temperatures, substitutions, trace notes, pour time, and unmold date.
Review notes
- Base oil total: 100.0%
- Primary oils: Olive Oil, Coconut Oil 76, Castor Oil, Lard, Pig Tallow (Manteca)
- Estimated raw material cost: $0.00
- Activated Charcoal is below the recommended minimum usage range.
Printout generated from a public SoapPilot recipe. Recalculate and verify every formula before production; this page is not professional safety, medical, cosmetic, or legal advice.
Label preview
Public recipe page with INCI-backed label visualization.
Label editor
Build a standard front label and an INCI-based back label from the recipe.
SoapPilot
Pine Tar 2025
Soap
Net wt. 100 g
Back label
Ingredients (INCI)
Lard, Pig Tallow (Manteca), Cocos Nucifera Oil, Olea Europaea Fruit Oil, Pine Tar, lye calc only no FA, Ricinus Communis Seed Oil, Charcoal Powder