Public Recipe
Pure Coconut Oil Fluid Hot Process Bar
Solid Soap · NaOH · 100 g oil load · 30% superfat · 8 views · 0 saves
This makes a very inexpensive bar and is one of our favorite recipes. If you would like to use a fragrance, please follow the suggested recommendation from your supplier. To make a pure coconut oil body soap, you can use CP, LTHP or HTHP. If you use HTHP, it will create a beautiful, fluid, and easily pourable recipe, especially if you add coconut milk after the cook. You can use 100% coconut oil and water for a pure coconut oil soap, or you can add a few of the extra ingredients to make our Triple Coconut Recipe with coconut milk, coconut oil, and ground/flaked coconut meat. Tips: If you would like to make this recipe with HTHP, be sure to use a bowl that is at least 3X the total recipe volume because coconut oil soaps are very exothermic and can have a large expansion. Using a smaller heating container can lead to dangerous spills. Be sure to cut your pure coconut oil soap as soon as it has hardened which can take anywhere between 20-60 minutes. We like to freeze all of our soaps and do so for 30 minutes before cutting.
Soap profile
Bubbly, cleansing, condition, hardness, longevity, and cream relative to the selected soap type.
Target 18-30
Target 10-20
Target 44-69
Target 29-54
Target 25-50
Target 16-30
Fatty acid balance
Weighted from the oil phase using the current recipe percentages.
Printable formula
Pure Coconut Oil Fluid Hot Process Bar
Solid Soap · NaOH
- Oil load
- 100 g
- Superfat
- 30%
- Lye
- 12.8 g
- Liquid
- 29.0 g
Ingredients
| Ingredient | Type | Percent | Weight |
|---|---|---|---|
| Coconut Oil 76 | oil | 100% | 100.0 g |
| Sodium Lactate | additive | 0% | 0.0 g |
| Sugar | additive | 0% | 0.0 g |
| Coconut Milk | additive | 40% | 40.0 g |
Non-oil entries are shown as percentage of oil load for maker planning.
Soap quality
- Bubbly lather
- 67
- Cleansing
- 67
- Condition
- 10
- Hardness
- 79
- Longevity
- 12
- Creamy lather
- 12
Fatty acids
- Lauric
- 48
- Myristic
- 19
- Palmitic
- 9
- Stearic
- 3
- Ricinoleic
- 0
- Oleic
- 8
- Linoleic
- 2
- Linolenic
- 0
Batch preparation checklist
- Verify formula, lye type, scale accuracy, and all ingredient labels.
- Wear eye protection, gloves, long sleeves, and prepare a ventilated lye-safe area.
- Weigh oils, additives, scent, lye, and liquid in separate clearly labeled containers.
- Confirm mold capacity, batch lot code, cure rack space, and cleanup plan.
- Record actual temperatures, substitutions, trace notes, pour time, and unmold date.
Review notes
- Base oil total: 100.0%
- Primary oils: Coconut Oil 76
- Estimated raw material cost: $0.00
- Coconut Oil 76 is above the recommended maximum usage range.
- Sodium Lactate is below the recommended minimum usage range.
- Additive load is high. Review formula stability.
Printout generated from a public SoapPilot recipe. Recalculate and verify every formula before production; this page is not professional safety, medical, cosmetic, or legal advice.
Label preview
Public recipe page with INCI-backed label visualization.
Label editor
Build a standard front label and an INCI-based back label from the recipe.
SoapPilot
Pure Coconut Oil Fluid Hot Process Bar
Soap
Net wt. 100 g
Back label
Ingredients (INCI)
Cocos Nucifera Oil, Coconut Milk, Sodium Lactate, Sugar