Public Recipe
Red Diamond 3
mixed · 100 g oil load · 5% superfat · 3 views · 0 saves
Directions: Put distilled water in metal container. Add Aloe and mix. Put large cotton ball of silk in. Add lye to water. Once below 140 degrees, mix in Bentonite Clay, glycerin and sodium lactate. Put oils on to heat and put Lanolin on to warm. Add lye water mix once oils are 160-170 degrees. Add Lanolin at trace
Soap profile
Bubbly, cleansing, condition, hardness, longevity, and cream relative to the selected soap type.
Target 18-30
Target 10-20
Target 44-69
Target 29-54
Target 25-50
Target 16-30
Fatty acid balance
Weighted from the oil phase using the current recipe percentages.
Printable formula
Red Diamond 3
mixed
- Oil load
- 100 g
- Superfat
- 5%
- Lye
- 14.8 g
- Liquid
- 29.7 g
Ingredients
| Ingredient | Type | Percent | Weight |
|---|---|---|---|
| Coconut Oil 76 | oil | 10% | 10.0 g |
| Castor Oil | oil | 5% | 5.0 g |
| Cocoa Butter | oil | 20% | 20.0 g |
| Kokum Butter | oil | 10% | 10.0 g |
| Lanolin | additive | 0% | 0.0 g |
| Stearic Acid | oil | 15% | 15.0 g |
| Sodium Lactate | additive | 0% | 0.0 g |
| Glycerin | additive | 0% | 0.0 g |
| Bentonite Clay | additive | 0% | 0.0 g |
| Illipe Butter | oil | 17% | 17.0 g |
| Mango Seed Butter | oil | 18% | 18.0 g |
| Myristic Acid | oil | 5% | 5.0 g |
| Aloe Powder | additive | 0% | 0.0 g |
| Tussah Silk | additive | 0% | 0.0 g |
Non-oil entries are shown as percentage of oil load for maker planning.
Soap quality
- Bubbly lather
- 12
- Cleansing
- 12
- Condition
- 32
- Hardness
- 65
- Longevity
- 53
- Creamy lather
- 57
Fatty acids
- Lauric
- 5
- Myristic
- 7
- Palmitic
- 11
- Stearic
- 42
- Ricinoleic
- 4
- Oleic
- 26
- Linoleic
- 2
- Linolenic
- 0
Batch preparation checklist
- Verify formula, lye type, scale accuracy, and all ingredient labels.
- Wear eye protection, gloves, long sleeves, and prepare a ventilated lye-safe area.
- Weigh oils, additives, scent, lye, and liquid in separate clearly labeled containers.
- Confirm mold capacity, batch lot code, cure rack space, and cleanup plan.
- Record actual temperatures, substitutions, trace notes, pour time, and unmold date.
Review notes
- Base oil total: 100.0%
- Primary oils: Coconut Oil 76, Castor Oil, Cocoa Butter, Kokum Butter
- Estimated raw material cost: $0.00
- Cocoa Butter is above the recommended maximum usage range.
- Lanolin is below the recommended minimum usage range.
- Stearic Acid is below the recommended minimum usage range.
- Sodium Lactate is below the recommended minimum usage range.
- Glycerin is below the recommended minimum usage range.
- Bentonite Clay is below the recommended minimum usage range.
- Illipe Butter is above the recommended maximum usage range.
Printout generated from a public SoapPilot recipe. Recalculate and verify every formula before production; this page is not professional safety, medical, cosmetic, or legal advice.
Label preview
Public recipe page with INCI-backed label visualization.
Label editor
Build a standard front label and an INCI-based back label from the recipe.
SoapPilot
Red Diamond 3
Soap
Net wt. 100 g
Back label
Ingredients (INCI)
Theobroma Cacao Seed Butter, Mango Seed Butter, Shorea Stenoptera Seed Butter, Stearic Acid, Cocos Nucifera Oil, Garcinia Indica Seed Butter, Ricinus Communis Seed Oil, Myristic Acid, Lanolin, Sodium Lactate, Glycerin, Bentonite, Aloe Powder, Tussah Silk