Public Recipe
Rose Lemonade
Solid Soap · NaOH · 100 g oil load · 6% superfat · 6 views · 0 saves
Superfat at 6% due to Coconut Oil being over 20% Kaolin Clay 2tsp ppo=4tsp Sugar 2 tsp ppo=4 tsp Coconut milk (Kroger organic in can). Add w/ fats=136.17 Step 1: Warm lye water master solution Step 2: Weigh Tallow and coconut oil. Add to pot and warm until liquid on low heat. Step 3: weigh out olive oil and add to pot with melted oils. Step 4: Mix sugar and kaolin clay with extra liquid. warm it to make sugar dissolves and stir to make sure clay dissolves. then add to oils. (Keep about 5ml to add to rose clay) Step 5: Add Essential oil blend for total max of 57g Step 6: Immersion blend until incorporated Step 7: Prepare color in separate pitcher: Mix 1 tsp Rose clay with 5ml of the extra liquid (milk?) Mix with a spatula to be sure clay is well incorporated. Leave spatula in pitcher. Place on a scale and tare to ready to measure out batter. Step 8: Check temps of oil and lye to see if both are between 85 and 110F Step 9: Pour lye mixture into oils over spatula. Step 10: At light trace put about half (650g) of batter into pitcher with Rose clay. Mix with spatula into well incorporated Step 11: Pour uncolored batter evenly into soap mold, tap to remove any air bubbles Step 12: Add colored batter to mold using drop swirl method p166 Essential Oils Usage rate can be 3-6% of total oil weight. 6% of 957.02=56g total (for all oils combined) Rose Essential Oil (3%-5% of total oil weight)=28g Lemon Essential Oil (3%-5% of total oil weight)=28g Add EO directly to oils. Add Kaolin clay to lye mixture.
Soap profile
Bubbly, cleansing, condition, hardness, longevity, and cream relative to the selected soap type.
Target 18-30
Target 10-20
Target 44-69
Target 29-54
Target 25-50
Target 16-30
Fatty acid balance
Weighted from the oil phase using the current recipe percentages.
Printable formula
Rose Lemonade
Solid Soap · NaOH
- Oil load
- 100 g
- Superfat
- 6%
- Lye
- 14.2 g
- Liquid
- 34.0 g
Ingredients
| Ingredient | Type | Percent | Weight |
|---|---|---|---|
| Olive Oil | oil | 30% | 30.0 g |
| Coconut Oil 76 | oil | 25% | 25.0 g |
| Beef Tallow | oil | 45% | 45.0 g |
| Kaolin Clay | additive | 0% | 0.0 g |
| Sugar | additive | 0% | 0.0 g |
| Coconut Milk | additive | 0% | 0.0 g |
Non-oil entries are shown as percentage of oil load for maker planning.
Soap quality
- Bubbly lather
- 19
- Cleansing
- 19
- Condition
- 48
- Hardness
- 48
- Longevity
- 29
- Creamy lather
- 29
Fatty acids
- Lauric
- 13
- Myristic
- 6
- Palmitic
- 18
- Stearic
- 11
- Ricinoleic
- 0
- Oleic
- 43
- Linoleic
- 5
- Linolenic
- 1
Batch preparation checklist
- Verify formula, lye type, scale accuracy, and all ingredient labels.
- Wear eye protection, gloves, long sleeves, and prepare a ventilated lye-safe area.
- Weigh oils, additives, scent, lye, and liquid in separate clearly labeled containers.
- Confirm mold capacity, batch lot code, cure rack space, and cleanup plan.
- Record actual temperatures, substitutions, trace notes, pour time, and unmold date.
Review notes
- Base oil total: 100.0%
- Primary oils: Olive Oil, Coconut Oil 76, Beef Tallow
- Estimated raw material cost: $0.00
- Kaolin Clay is below the recommended minimum usage range.
Printout generated from a public SoapPilot recipe. Recalculate and verify every formula before production; this page is not professional safety, medical, cosmetic, or legal advice.
Label preview
Public recipe page with INCI-backed label visualization.
Label editor
Build a standard front label and an INCI-based back label from the recipe.
SoapPilot
Rose Lemonade
Soap
Net wt. 100 g
Back label
Ingredients (INCI)
Tallow, Olea Europaea Fruit Oil, Cocos Nucifera Oil, Kaolin, Sugar, Coconut Milk