Public Recipe
Rosemary Gel Bar
Solid Soap · NaOH · 100 g oil load · 7% superfat · 6 views · 0 saves
Put rosemary in a container and add boiled distilled water. Let this steep Place 130g of fresh rosemary in a double boiler, or a glass container, and add 400g olive oil. Let this infuse for at least 6 hours on low heat Strain the rosemary infused oil, and measure out the given recipe amount. To this, add the coconut oil, shea butter, cocoa butter Let the oils melt together, and then allow to cool Back to the rosemary tea….measure out Xg of this rosemary tea, and add X amount tbsp flax seeds. In a saucepan, heat these together and bring to a boil. Let it simmer for a bit. Put the flax and roasmary tea through a strainer and you will have a flax gel. Add FO or EOs: rosemary, lavender, eucalyptus, thyme, cedarwood. Add Xg citric acid to 110 g rosemary tea, and stir until dissolved Add salt, if you're using it Add Sodium hydroxide - add to the tea, and stir to dissolve. Set this aside to cool Now take the rosemary fax gel and add it to the oils. Blend to emulsify Add the lye water at about 100 degrees Mix to combine, and then pulse blend to form an emulsion Pour This was made on 1/24/26 It was a bit stressful, because I wanted to make sure I had the lye and water concentrations just right, and also I wanted to make sure that I accounted for the citric acid solution. Stand by for results.
Soap profile
Bubbly, cleansing, condition, hardness, longevity, and cream relative to the selected soap type.
Target 18-30
Target 10-20
Target 44-69
Target 29-54
Target 25-50
Target 16-30
Fatty acid balance
Weighted from the oil phase using the current recipe percentages.
Printable formula
Rosemary Gel Bar
Solid Soap · NaOH
- Oil load
- 100 g
- Superfat
- 7%
- Lye
- 13.7 g
- Liquid
- 32.9 g
Ingredients
| Ingredient | Type | Percent | Weight |
|---|---|---|---|
| Olive Oil | oil | 55% | 55.0 g |
| Coconut Oil 76 | oil | 26% | 26.0 g |
| Shea Butter | oil | 8% | 8.0 g |
| Cocoa Butter | oil | 11% | 11.0 g |
| Citric Acid | additive | 30% | 30.0 g |
| Salt | additive | 15% | 15.0 g |
| Honey | additive | 20% | 20.0 g |
| Flax gel | additive | 187.5% | 187.5 g |
Non-oil entries are shown as percentage of oil load for maker planning.
Soap quality
- Bubbly lather
- 17
- Cleansing
- 17
- Condition
- 56
- Hardness
- 40
- Longevity
- 22
- Creamy lather
- 22
Fatty acids
- Lauric
- 12
- Myristic
- 5
- Palmitic
- 13
- Stearic
- 9
- Ricinoleic
- 0
- Oleic
- 49
- Linoleic
- 7
- Linolenic
- 1
Batch preparation checklist
- Verify formula, lye type, scale accuracy, and all ingredient labels.
- Wear eye protection, gloves, long sleeves, and prepare a ventilated lye-safe area.
- Weigh oils, additives, scent, lye, and liquid in separate clearly labeled containers.
- Confirm mold capacity, batch lot code, cure rack space, and cleanup plan.
- Record actual temperatures, substitutions, trace notes, pour time, and unmold date.
Review notes
- Base oil total: 100.0%
- Primary oils: Olive Oil, Coconut Oil 76, Shea Butter, Cocoa Butter
- Estimated raw material cost: $0.00
- Citric Acid is above the recommended maximum usage range.
- Salt is above the recommended maximum usage range.
- Honey is above the recommended maximum usage range.
- Additive load is high. Review formula stability.
Printout generated from a public SoapPilot recipe. Recalculate and verify every formula before production; this page is not professional safety, medical, cosmetic, or legal advice.
Label preview
Public recipe page with INCI-backed label visualization.
Label editor
Build a standard front label and an INCI-based back label from the recipe.
SoapPilot
Rosemary Gel Bar
Soap
Net wt. 100 g
Back label
Ingredients (INCI)
Flax gel, Olea Europaea Fruit Oil, Citric Acid, Cocos Nucifera Oil, Honey, Sodium Chloride, Theobroma Cacao Seed Butter, Butyrospermum Parkii Butter