Public Recipe
Squatch Pine Tar
Solid Soap · NaOH · 100 g oil load · 5% superfat · 4 views · 0 saves
Make sure oatmeal is ground up mix lye and oils at or below 100 mix everything with oils before adding lye. used a whisk for most of it but mixer for very last but as soon as trace starts it sets quick. was enough for 2 molds
Soap profile
Bubbly, cleansing, condition, hardness, longevity, and cream relative to the selected soap type.
Target 18-30
Target 10-20
Target 44-69
Target 29-54
Target 25-50
Target 16-30
Fatty acid balance
Weighted from the oil phase using the current recipe percentages.
Printable formula
Squatch Pine Tar
Solid Soap · NaOH
- Oil load
- 100 g
- Superfat
- 5%
- Lye
- 15.1 g
- Liquid
- 36.3 g
Ingredients
| Ingredient | Type | Percent | Weight |
|---|---|---|---|
| Olive Oil | oil | 35% | 35.0 g |
| Coconut Oil 76 | oil | 15% | 15.0 g |
| Castor Oil | oil | 5% | 5.0 g |
| Shea Butter | oil | 20% | 20.0 g |
| Bentonite Clay | additive | 0% | 0.0 g |
| Activated Charcoal | additive | 0% | 0.0 g |
| Palm Kernel Oil Flakes, hydrogenated | oil | 20% | 20.0 g |
| Pine Tar, lye calc only no FA | oil | 5% | 5.0 g |
| Coffee Grounds | additive | 0% | 0.0 g |
| Oatmeal | additive | 0% | 0.0 g |
| pumice | additive | 0% | 0.0 g |
| Sea salt | additive | 0% | 0.0 g |
Non-oil entries are shown as percentage of oil load for maker planning.
Soap quality
- Bubbly lather
- 24
- Cleansing
- 23
- Condition
- 46
- Hardness
- 45
- Longevity
- 21
- Creamy lather
- 26
Fatty acids
- Lauric
- 17
- Myristic
- 6
- Palmitic
- 8
- Stearic
- 13
- Ricinoleic
- 4
- Oleic
- 36
- Linoleic
- 5
- Linolenic
- 0
Batch preparation checklist
- Verify formula, lye type, scale accuracy, and all ingredient labels.
- Wear eye protection, gloves, long sleeves, and prepare a ventilated lye-safe area.
- Weigh oils, additives, scent, lye, and liquid in separate clearly labeled containers.
- Confirm mold capacity, batch lot code, cure rack space, and cleanup plan.
- Record actual temperatures, substitutions, trace notes, pour time, and unmold date.
Review notes
- Base oil total: 100.0%
- Primary oils: Olive Oil, Coconut Oil 76, Castor Oil, Shea Butter
- Estimated raw material cost: $0.00
- Bentonite Clay is below the recommended minimum usage range.
- Activated Charcoal is below the recommended minimum usage range.
Printout generated from a public SoapPilot recipe. Recalculate and verify every formula before production; this page is not professional safety, medical, cosmetic, or legal advice.
Label preview
Public recipe page with INCI-backed label visualization.
Label editor
Build a standard front label and an INCI-based back label from the recipe.
SoapPilot
Squatch Pine Tar
Soap
Net wt. 100 g
Back label
Ingredients (INCI)
Olea Europaea Fruit Oil, Butyrospermum Parkii Butter, Palm Kernel Oil Flakes, hydrogenated, Cocos Nucifera Oil, Ricinus Communis Seed Oil, Pine Tar, lye calc only no FA, Bentonite, Charcoal Powder, Coffee Grounds, Oatmeal, pumice, Sea salt