Public Recipe
Tea Tree and Charcoal, CP Experiment now with 2:1 water lye and 3% sodium lactate liquid
Solid Soap · NaOH · 100 g oil load · 5% superfat · 4 views · 0 saves
1% Sodium Citrate (9.5g) Add to Lye Solution before Lye (CHELATOR) 3% Sodium Lactate (28.5g) (increases fluidity, makes a harder bar, preservative 1% TOW Sorbitol - (9.5g) Add to hot Lye solution before Lye (LATHER STABILISER) 1 tsp per 500g Clay (1/4tsp) - used purple brazilian clay put in 1/8th tsp of lavender EO Poured at a light trace. Lye was around 52 degree celicus and oils around 52 degree celcius. Did not oven insulate. put on room temp baking tray with chopping board on top and blanket to insulate. ENDED UP REBATCHING INTO HOT PROCESS AS STEARIC ACID DID NOT GET SAPONIFIED. Wil REmove stearic acid from this recipe unless I soap at a higher temperature.
Soap profile
Bubbly, cleansing, condition, hardness, longevity, and cream relative to the selected soap type.
Target 18-30
Target 10-20
Target 44-69
Target 29-54
Target 25-50
Target 16-30
Fatty acid balance
Weighted from the oil phase using the current recipe percentages.
Printable formula
Tea Tree and Charcoal, CP Experiment now with 2:1 water lye and 3% sodium lactate liquid
Solid Soap · NaOH
- Oil load
- 100 g
- Superfat
- 5%
- Lye
- 16.3 g
- Liquid
- 24.7 g
Ingredients
| Ingredient | Type | Percent | Weight |
|---|---|---|---|
| Coconut Oil 76 | oil | 35% | 35.0 g |
| Palm Oil | oil | 15% | 15.0 g |
| Castor Oil | oil | 5% | 5.0 g |
| Stearic Acid | oil | 10% | 10.0 g |
| Olive Oil pomace | oil | 35% | 35.0 g |
Soap quality
- Bubbly lather
- 24
- Cleansing
- 24
- Condition
- 45
- Hardness
- 51
- Longevity
- 27
- Creamy lather
- 31
Fatty acids
- Lauric
- 17
- Myristic
- 7
- Palmitic
- 15
- Stearic
- 12
- Ricinoleic
- 4
- Oleic
- 33
- Linoleic
- 7
- Linolenic
- 1
Batch preparation checklist
- Verify formula, lye type, scale accuracy, and all ingredient labels.
- Wear eye protection, gloves, long sleeves, and prepare a ventilated lye-safe area.
- Weigh oils, additives, scent, lye, and liquid in separate clearly labeled containers.
- Confirm mold capacity, batch lot code, cure rack space, and cleanup plan.
- Record actual temperatures, substitutions, trace notes, pour time, and unmold date.
Review notes
- Base oil total: 100.0%
- Primary oils: Coconut Oil 76, Palm Oil, Castor Oil, Stearic Acid
- Estimated raw material cost: $0.00
- Coconut Oil 76 is above the recommended maximum usage range.
- Stearic Acid is below the recommended minimum usage range.
Printout generated from a public SoapPilot recipe. Recalculate and verify every formula before production; this page is not professional safety, medical, cosmetic, or legal advice.
Label preview
Public recipe page with INCI-backed label visualization.
Label editor
Build a standard front label and an INCI-based back label from the recipe.
SoapPilot
Tea Tree and Charcoal, CP Experiment now with 2:1 water lye and 3% sodium lactate liquid
Soap
Net wt. 100 g
Back label
Ingredients (INCI)
Cocos Nucifera Oil, Olive Oil pomace, Elaeis Guineensis Oil, Stearic Acid, Ricinus Communis Seed Oil